OP-600P

OP-600P
ADSL/VDSL/DMM/35B Function

Basic Version VDSL VDSL2 Tester Maintenance Tool Support 35b 30a 17a ADSL WAN & LAN Tester

Feature

1. Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2

2. Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance,

Distance)

3. Supports Modem emulation and simulating login to Internet

4. Supports ISP login (user name / password) and IP Ping test (WAN PING Test,

LAN PING Test)

5. Supports all multi-protocol, PPPoE / PPPoA (LLC or VC-MUX)

6. Connects to CO via alligator clip or RJ11

7. Rechargeable Li-ion Battery

8. Beep and LEDs alarm indications (Lower Power, PPP, LAN,xDSL)

9. Data memory fuction

10. LCD display, Menu operation

11. Auto shut off if no any operation on keyboard

12. Compliant with all known DSLAMs

13. Software management

14. Simple, portable and money-saved

Function

* DSL Physical layer test

* Modem Emulation (Replace the user Modem completely)

* PPPoE Dialing (RFC1683,RFC2684,RFC2516)

* PPPoA Dialing (RFC2364)

* Telephone Function

* DMM Test

* Ping Function (WAN & LAN)

* Data upload to computer and software management

* Setup system parameter: backlight time, shut off automatically time without operation,

press tone,

* Revise PPPoE / PPPoA dial attribute, user name and password; restore factory value and

so on.

* Check dangerous voltage

* Optical Power Meter (Optional)-- this link does not include this function

* Visual Fault Locator (Optional)- this link does not include this function

* Tone Tracker (Optional)-- this link does not include this function

* TDR Cable Fault Locator (Optional)-- this link does not include this function

* Support 35b 30a 17a Protocol-- this Link support this function'

ADSL2+
Standards	ITU G.992.1(G.dmt),ITU G.992.2(G.lite),ITU G.994.1(G.hs), ANSI T1.413 issue #2,ITU G.992.5(ADSL2+)Annex L
Up channel rate	0~1.2Mbps
Down channel rate	0~24Mbps
Up/Down attenuation	0~63.5dB
Up/Down noise margin	0~32dB
Output power	Available
Error test	CRC, FEC, HEC, NCD, LOS
Display DSL connect mode	Available
Display channel bit map	Available
ADSL
Standards	ITU G.992.1 (G.dmt), ITU G.992.2(G.lite) ITU G.994.1(G.hs), ANSI T1.413 Issue # 2
Up channel rate	0~1Mbps
Down channel rate	0~8Mbps
Up/Down attenuation	0~63.5dB
Up/Down noise margin	0~32dB
Output power	Available
Error test	CRC, FEC, HEC, NCD, LOS
Display DSL connect mode	Available
Display channel bit map	Available
VDSL2
Be compatible with ADSL2+, ADSL standard.
DSL line attenuation
DSL line noise margin
DSL line up/down channel speed (Inter/Fast mode)
DSL line up/down maximum rate
DMT sub channel bit number: 0~15, and each sub channel frequency points
DSL line error number (CRC, HEC, FEC, LCD, OCD)
DSL line local output power
DSLAM information
Error Code Second
Impulse Noise Protection (INP)
DMM TestDC voltage (V):0~400AC voltage (V):0~400Loop resistance(Omega):0~20000Capacitance (nF):0~1000Insulation resistance (MOmega):0~50Optical Power Meter ( Optional)-basic version does not include this functionMeasurement range:-70~+10dBmWavelength850nm#122891300nm#122891310nm#122891490nm#122891550nm#122891625nmVisual Fault Locator (Optional)-basic version does not include this functionOutput Power1mwWavelength650nm plusmn 20nmTone Tracker (Optional)-basic version does not include this functionWith supplied accessories, it can do cable tracing and find the trend of the linesTDR Function (Optional)-Auto Test the cable fault distance (Cable Break/ Cable Mix)-basic version does not include this functionTest Range<2.5kmDead Zone<1mResolution Rate1mGeneral SpecificationLCD800x480 TFTPower supplyInternal Rechargeable 6600mAH Li-ion batteryBattery Duration4 to 5 hoursWorking temperature0-40 oCWorking moisture5%-90%Dimensions170mmtimes70mmtimes52mmWeight:<0.6kg Support 9 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a,30a, 35b